REAR PANEL JACKS

Component: Y-PBPRInputs

Inputs 4 and 5 provide Y-PBPRjacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use standard video signal for INPUT:4 and 5.

NOTES: 1. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV’s PB input and the components R-Y output to the TV’s PR input.

2.Your component outputs may be labeled Y-CBCR. In this case, connect the component CB output to the TV’s PB input and the component CR output to the TV’s PR input.

3.It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPRinputs. (See pages 55 and 56.)

4.To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPRjacks.

5.When using Y-PBPRinput, only 480i signal can be viewed as a sub-picture.

6.Input 4 and 5 (Y/VIDEO) can be used for standard video input.

11

Page 11
Image 11
Hitachi 53FDX20B important safety instructions Component Y-PBPRInputs