Hitachi 43FDX11B, 53UDX10B, 61UDX10B, 43FDX10B Connecting AN S-VIDEO Source to Input 1, 2

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING AN S-VIDEO SOURCE TO INPUT 1, 2 AND 3

1.Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID1~VID3 button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after approximately eight seconds.

5.Press the ANT button to return to the previous channel.

Rear Panel of Television

See tips on Page 14

ANT A

TO

CONVERTER

	ANT B
AUDIO TO HI-FI
R	L

S-VIDEO	S-VIDEO
VIDEO	VIDEO	Y/VIDEO
(MONO)	(MONO)	PB	(MONO)
L	L		L
		PR
R	R		R
AUDIO	AUDIO		AUDIO
INPUT 1	INPUT 2	INPUT 4

		S-VIDEO
Y/VIDEO		VIDEO
PB	(MONO)	L
	L
PR
	R	R
	AUDIO	AUDIO
INPUT 5		MONITOR
		OUT

S-VIDEO V L R

OUTPUT

Back of

VCR

VCR or Laserdisc Player

Hitachi Model or

Similar Model

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example on page 13) Refer to your VCR operating guide for more information on line input- output connections.

18