SETUP
64
Reception channels are shown at the left.
Refer to your cable or TV guide for channel identification standards.
When in ANT C, select Signal Meter when using an indoor or outdoor antenna. This feature will show the sig-
nal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal recep-
tion. If Auto Channel Scan is not performed first, you cannot use this feature and the screen below will appear
(see page 65).
Signal Meter
THUMB
STICK
SELECT
Setup
Set The Channels
ANT C(DTV)
SEL
Close
Strength : 68
Peak : 71
Close
Setup
Set The Channels
Ant C (DTV)
Move
SEL
Select
Source
Auto Channel Scan
Start
Antenna Cable
Signal Meter
Signal Meter
Setup
Set The Channels
Ant C (DTV)
Move
SEL
Select
Source
Auto Channel Scan
Start
Antenna Cable
Signal Meter
Execute Auto Scan First
Press down on THUMBSTICK to Close or press Exit to quit MENU.
NOTES: 1. The signal meter menu will automatically disappear after 30 seconds.
2. Weak signals will display a black screen (no video, no audio).
3. Antenna positioning must be accurate for best signal reception.
AIR CATV1 or CATV2VHF 2~13chUHF 14-69ch 1~125RECEPTION BAND