English
4. Oblique angle
Before the power tool is shipped from the factory, it is adjusted for 0° and left 45° bevel cutting angles.
The positioning and bevel cutting angle can be adjusted by changing the height of the 8 mm bolt.
(Maximum bevel cutting angle is 45°).
8mm Bolt
Fig. 10
8 mm Bolt
Fig. 11
5.Securing the workpiece
WARNING: Always clamp or vise to secure the workpiece to the fence; otherwise the workpiece
might be thrust from the table and cause bodily harm.
6. Installing the holders (Optional accessory)
6mm Wing Bolt
Holder
Steel
Squar
The holders help keep longer workpieces stable and in place during the cutting operation.
(1)As indicated in Fig. 12, use a steel square for aligning the upper edge of the holders with the base surface.
(2)After aligning, secure the holders with the 6 mm wing bolts.
Base Surface
Fig. 12
13
