CHARGING

Before using the power tool, charge the battery as follows.

1.Connect the charger’s power cord to a receptacle. When the power cord is connected, the charger’s pilot lamp will blink in red. (At 1-second intervals)

CAUTION

Do not use the electrical cord if damaged. Have it repaired immediately.

2.Insert the battery into the charger.

Firmly insert the battery into the charger, as shown in Fig. 11.

Battery

Pilot lamp

Charger

Fig. 11

Table 1

3.Charging

When inserting a battery in the charger, charging will commence and the pilot lamp will light continuously in red.

When the battery becomes fully recharged, the pilot

lamp will blink in red. (At 1-second intervals) (See Table 1)

(1)Pilot lamp indication

The indications of the pilot lamp will be as shown in Table 1, according to the condition of the charger or the rechargeable battery.

 

 

 

 

 

 

 

Indications of the pilot lamp

 

 

 

Before

 

Lights for 0.5 seconds. Does not light for 0.5

 

 

 

 

 

 

 

Blinks

seconds. (off for 0.5 seconds)

 

 

 

charging

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lights

Lights continuously

 

 

 

charging

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pilot lamp

Charging

Blinks

Lights for 0.5 seconds. Does not light for 0.5

 

seconds. (off for 0.5 seconds)

 

complete

 

(red)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery overheated.

 

 

Overheat

 

Lights for 1 second. Does not light for 0.5

 

 

Blinks

seconds. (off for 0.5 seconds)

Unable to charge.

 

 

standby

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Charging will commence

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

when battery cools)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Charging

 

Lights for 0.1 seconds. Does not light for 0.1

Malfunction in the

 

 

Flickers

seconds. (off for 0.1 seconds)

 

 

impossible

battery or the charger

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2)Regarding the temperatures of the rechargeable battery

The temperatures for rechargeable batteries are as shown in Table 2, and batteries that have become hot should be cooled for a while before being recharged.

Table 2 Recharging ranges of batteries

Temperatures at

Rechargeable batteries which the battery can be recharged

BSL1820, BSL1830, BSL1840,

(3)Regarding recharging time

Depending on the combination of the charger and batteries, the charging time will become as shown in Table 3.

Table 3 Charging time (At 20°C)

 

Charger

Battery

UC18YFSL

 

BSL1820

Approx. 30 min.

BSL1830

Approx. 45 min.

 

 

BSL1840

Approx. 60 min.

BSL1850

0°C – 40°C

BSL1850

Approx. 75 min.

7