PRECAUTIONS ON USING CIRCULAR SAW

1.Do not use saw blades which are deformed or cracked.

2.Do not use saw blades made of high speed steel.

3.Do not use saw blades which do not comply with the characteristics specified in these instructions.

4.Do not stop the saw blades by lateral pressure on the disc.

5.Always keep the saw blades sharp.

6.Ensure that the lower guard moves smoothly and freely.

7.Never use the circular saw with its lower guard fixed in the open position.

8.Ensure that the retraction mechanism of the guard system operates correctly.

9.Never operate the circular saw with the saw blade turned upward or to the side.

10.Ensure that the material is free of foreign matters such as nails.

11.For models C9SA2 and C9BA2, the saw blades should be 235 mm.

12.For model C9BA2, be careful of brake kickback. C9BA2 model features an electric brake that functions when the switch is released. As there is some kickback when the brake functions, be sure to hold the main body securely.

13.Sparks can sometimes appear caused by braking operation when the switch is turned off since C9BA2 model employ electric brakes. Be informed, however, that this phenomenon is not a machine trouble.

14.For model C9BA2, when the brake becomes ineffective, replace the carbon brushes with new ones.

15.Disconnect the plug from the receptacle before carrying out any adjustment, servicing or maintenance.

SPECIFICATIONS

Model

 

C9SA2

C9BA2

Voltage (by areas)*

 

(110V, 220V, 230V, 240V)

Cutting Depth

90°

86

mm

45°

65

mm

 

Power Input*

 

1570 W / 2000 W

No-Load Speed

 

5000 / min

Weight (without cord)

 

6.8 kg

*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

 

(1)

Saw Blade (Dia. 235 mm) ........................................

1

(2)

Hex. bar wrench .......................................................

1

(3)

Guide ..........................................................................

1

(4)

Wing-bolt ...................................................................

1

Standard accessories are subject to change without

notice.

 

OPTIONAL ACCESSORIES (sold separately)

(1)Washer (A) ... for 16 mm (Hole dia. of saw blade)

... for 30 mm (Hole dia. of saw blade)

(2)Guide Rail Adapter (See Fig. 12)

Optional accessories are subject to change without notice.

APPLICATION

Cutting various types of wood.

PRIOR TO OPERATION

1.Power source

Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.

2.Power switch

Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident.

3.Extension cord

When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

4.Prepare a wooden workbench (Fig. 1)

Since the saw blade will extend beyond the lower surface of the lumber, place the lumber on a workbench when cutting. If a square block is utilized as a workbench, select level ground to ensure it is properly stabilized. An unstable workbench will result in hazardous operation.

5.When using the side handle (Fig. 2)

Securely attach the side handle to the base with

the two flat head screws (M6 ⋅ 16) when using the side handle.

CAUTION

To avoid possible accident, always ensure that the portion of lumber remaining after cutting is securely anchored or held in position.

6