9

ENGLISH
Remote control

ID SET button

16
POWER OFF button 13

POWER ON button 13 POWER ON/OFF button

13
MENU button 16

MUTE button 14 VOLUME UP/DOWN buttons

14

RETURN button

16

RECALL button

15
AUTO button 16
PinP button 34
ID button 16

SELECT/ADJUST buttons

16
OK button 16

Loading Batteries

1. Open the battery cover.

• Slide back and remove the battery
cover in the direction of the arrow.

2. Load batteries.

• Load two Size AA batteries included observing the correct
polarities.

3. Close the battery cover.

• Replace the battery cover in the direction of the arrow and snap
it back into place.
Use the remote control within about 5 m from front of the unit’s
remote-control sensor and within 30 degrees on both sides.
With in 30
degrees
About 5m
About 3m
With in 30
degrees
About 3m
AV1 AV2
RGB 1RGB 2
AV3
MUTEVOL
VOL
AV4
AUTO PinP
OK
SIZERECALL
MENU
ID ID SET
• Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
• When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
CAUTION
ATTENTION
• Do not drop or impact the remote control.
• Do not splash the remote control with water or put it on a wet
object to avoid possible failures.
• Before leaving the remote control out of use for an extended
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
batteries.
• Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.

Handling the Remote Control

SIZE button

15
RGB/VIDEO buttons 14
AV1 AV2
RGB 1 RGB 2
AV3
MUTE VOL
VOL
AV4
AUTO PinP
OK
SIZE RECALL
MENU
ID ID SET
Downloaded From TV-Manual.com Manuals