Hitachi 55PD5000, CMP5500, 55PMA550 OTHER FEATURES Automatic Store

39

ENGLISH

Selected characters Setup hint

Audio Input

AV1

Stereo L/Mono

This should correspond to the audio signal from the equipment that is

connected to AV1 audio input terminal. If it is monaural audio, set this to

L/Mono.

AV2

(Same to AV1)

AV3

AV4

Scart Output Not Available (grayed out)

RGB1

DVI-PC DVI-STB

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB1 DVI terminal.

RGB2 (1st step)

RGB Component

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB2 D-sub terminal.

RGB2 (2nd step)

Auto HDTV SDTV/DVD

This step should be set only when [Component] is selected on the 1st

step.

This should correspond to the signal mode of the signal from the

equipment that is connected to RGB2 D-sub terminal.

• Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

• If the input signal contains much noise or has a low level at Auto and the

operation is found erratic, set this to match the input signal.

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.

OTHER FEATURESAutomatic Store

Menu Display Registration condition

Picture Picture Mode 1 setting is registered.

Contrast For every input function and every

Picture Mode, 1 setting is

registered.

Brightness

Colour

Sharpness

Hue

Colour Temperature

Contrast Mode

YNR

CNR

Film Mode

PAL Comb Filter

LTI

CTI

Black Enhancement

Auto Colour

Colour Temp. Adjust

R Amplitude For every Colour Temperature, 1

setting is registered.

G Amplitude

B Amplitude

R Cut Off

G Cut Off

B Cut Off

Colour Management For every input function and every

Picture Mode, 1 setting is

registered.

Magenta 1 setting is registered.

Red

Menu Display Registration condition

Picture Yellow 1 setting is registered.

Green

Cyan

Blue

Colour Decoding -

Red For every Colour Temperature, 1

setting is registered.

Green

Colour For every input function and every

Picture Mode, 1 setting is

registered.

Hue

Function Video Power Save 1 setting is registered.

Default Zoom

Setup System 1 setting is registered.

Colour System 1 setting is registered.

AV1

AV2

AV3

AV4

Video Input -

AV1 1 setting is registered.

AV2

AV4

Audio Input -

AV1 1 setting is registered.

AV2

AV3

AV4

RGB1

RGB2

• The previously recorded items will be lost.

▼

▼

Downloaded From TV-Manual.com Manuals

Contents

Main USER'S MANUAL MANUEL UTILISATEUR BEDIENUNGSANLEITUNG NOTE: REMARQUE: HINWEIS: 1 USER'S MANUAL Notes on lnstallation Work: Note for Dealers: 2 Important FEATURES CONTENTS 4 SAFETY INSTRUCTIONS Typical Symbols CAUTION About the Symbols Never use the monitor if a problem should occur. 5 FOR THE CUSTOMERS IN THE U.K. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS WARNING: THIS EQUIPMENT MUST BE EARTHED IMPORTANT Be cautious of the power cord connection. PRECAUTIONS Installation environment How to view the monitor Note on image retention How to clean the plasma screen panel of the monitor Page 8 COMPONENT NAMES External device connection terminals Front Control panel Rear Remote control SIZE button Handling the Remote Control About 3m SELECT/ADJUST buttons Anti-tumble measures Wood screw Two places Securing to a wall or pillar Securing desktop Connecting to a PC Monitor rear panel Page Turning Power On and Off Indicating lamp 14 Audio Mute Volume 15 Input Switching Volume Adjustment Volume 15 Size Switching Display area selection diagram (RGB input) Real mode position Using the Menu Screen (On-screen display system) Independent Operation of Multiple Monitors (ID No) Automatic Adjustment of Screen Position and the Clock PICTURE MENU Contrast Colour Temp. Adjustment Colour Temperature Picture Enhancement AUDIO MENU TIMER MENU --Min. 30Min. 60Min. 120Min. 90Min. On Timer Screen Saver Off 5Min. 10Min. 60Min. 40Min. 20Min. Gamma Standby White Inverse Auto Adjust* Horizontal Position Frequency Mode Vertical Filter Off 1280x768 1366x768 LANGUAGE MENU OTHER FEATURES Automatic Store 22 Signal Check Changes in the signal status are displayed on the screen as they arise. Status Display Action OTHER FEATURES (continued) Power Save Mode NOTES About screen defects About residual images About the panel screen IMAGE RETENTION OF PLASMA DISPLAY Page Page Actions to Correct Abnormal Displays B TROUBLESHOOTING (continued) 27 Product specifications and designs are subject to change without notice. Signal Input RGB terminal (D-sub 15-pin connector) Sync signal type Priority Pin Input signal 28 Signal Input (continued) No. 12345678 910111213141516 17 18 19 20 21 22 23 24 PRODUCT SPECIFICATIONS (continued) DVI terminal (DVI-D) 29 No. Signal mode Horizontal frequency (kHz) Dot clock frequency (MHz) Remarks Signal Name Resolution Vertical frequency (Hz) With Analog RGB signal input (RGB2 input) Page 31 Optional Video Unit Function [An example of connecting video imaging devices] Connecting to a Video Imaging Device With DVI-STB and RGB component setup Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details. ) Input Switching Size Switching Display size selection diagram Page 34 Displaying MULTI PICTURE 2 Pictures (Split) MENU PICTURE MENU PICTURE MENU (continued) Colour Management Magenta Default Zoom Video Power Save RGB R G B System System1 System2 S.Video Composite AV2 (2nd step) RGB Composite/Component OTHER FEATURES Automatic Store 44 The monitor takes at least 30 minutes to attain the status of optimal picture quality. This table shows the specifications when the optional video unit has been inserted. 29 Signal Input 1 2 3 4 S-input connector pin specifications Scart connector pin specifications Recommended Signal List With Digital RGB signal input (RGB1 input) PRODUCT SPECIFICATIONS (continued) With Composite Input(AV1~AV4 input) and S-video Input (AV3 input). With R, G, B Video input (AV2 and AV4 input). Optional Tuner Unit Function Handling the Remote Control COMPONENT NAMES Remote control (provided for the optional tuner unit) Loading Batteries COMPONENT NAMES (continued) Remote control (provided for the optional tuner unit) (continued) PICTURE MODE INPUT SELECT RECALL DVD CONTROL 45 INDEX button MODE button TV / TEXT button [Buttons for TELETEXT Mode] Connecting Antenna Precautions when connecting the antenna Input Switching Size Switching AB Displaying MULTI PICTURE 49 2 pictures (Split) 4 pictures 12 pictures A 49 49 4 Pictures ( TV The display will go out in approximately 6 seconds. AB Split Strobe Freeze Mode Picture Freezing Mode Display ID Number Inverse Standby White Gamma 51 MENU [During TV mode] 52 SETUP MENU (continued) [During VIDEO signal input] 53 OTHER FUNCTIONS NICAM signal received A2 / NICAM / Sound Multiplex BILINGUAL / DUAL sound broadcast Sound multiplex signal received OTHER FUNCTIONS (continued) 55 snowy picture - poor sound multiple images - sound O.K intermittent interference no picture or sound This table shows the specifications when the optional video unit and tuner unit have been inserted. The monitor takes at least 30 minutes to attain the status of optimal picture quality. 29 42