Hitachi CP-X985W user manual INSTALLATION continued, Cabling, English

INSTALLATION (continued)

Cabling

Refer to the table below for connecting each terminal of the projector to each device.

Table 2. Cabling

Function	Terminal	Cable
Analog RGB input	RGB IN 1	Accessory RGB cable or optional RGB
	RGB IN 2
		cable with D-sub 15-pin shrink jack and
		inch thread screws
Analog RGB output	RGB OUT
Digital RGB input	DIGITAL	Optional digital RGB cable with inch thread
		screws
	AUDIO IN [RGB 1] / [DIGITAL]
Audio input	(interlocked with RGB IN 1 or
	DIGITAL)	Optional audio cable with stereo mini jack
(from the computer)
	AUDIO IN [RGB 2]
	(interlocked with RGB IN 2)
PS/2 mouse control		Accessory PS/2 mouse cable
ADB mouse control	CONTROL	Optional ADB mouse cable
Serial mouse control		Optional Serial mouse cable
RS-232C communication		Optional RS-232C cable
USB mouse control	USB	Optional USB cable
S-video input	S-VIDEO	Optional S-video cable with mini DIN 4-pin
		jack
Video input	VIDEO	Accessory video/audio cable
	COMPONENT VIDEO Y
Component video input	COMPONENT VIDEO CB/PB	Accessory component video cable
	COMPONENT VIDEO CR/PR
Audio input	AUDIO (MONO)/L	Accessory video/audio cable or optional
(from video equipment)	AUDIO R	audio cable with RCA jack
Audio output	AUDIO OUT	Optional audio cable with stereo mini jack

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

•Before connecting, turn off to all devices to be connected, except for the USB cable.

•The cables (Power cord, RGB cable and other cables) may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.

NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device.

•Secure the screws on the connectors and tighten.

•For some RGB input modes, the accessory Mac adapter is necessary.

•To select the digital RGB input, the comuter may need some settings. See the manuals of the computer for details.

•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

•Refer to the “TECNICAL” section for the pin assign of connectors and RS-232C communication data.

•When the DIGITAL terminal is used, the RGB OUT terminal may not function.

ENGLISH

ENGLISH-7