English
PRECAUTIONS ON USING CHAIN SAW
1.Hold the unit firmly with both hands, and be alert for recoiling which may occur during operation.
2.Pull plug immediately if the cord becomes damaged or cut.
3.Pitch of chain and No. of drive links are 9.5 mm ⋅ 52.
4.Ensure that the material is free of foreign matter such as nails.
5.Local regulations may require not to cut sapling. Ensure that there are no such regulations when cutting sapling.
SPECIFICATIONS
Model |
|
|
|
| CS35B | ||||
|
|
|
|
|
|
| |||
Bar Size |
|
|
| 350 mm |
| 350 mm | |||
|
|
|
|
|
|
|
| ||
Voltage (by areas)* |
|
|
| 110V, 115V, 120V, 127V, |
|
|
|
| (110V, 220V, 230V, 240V) |
|
|
|
|
|
|
| |||
|
|
|
|
|
| ||||
|
|
| 220V, 230V, 240V |
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Input* |
|
|
|
|
|
|
| 1140W* | |
|
|
|
|
|
|
| |||
|
|
| 450 m/min. (7.5 m/sec.) |
| 10 m/sec. (600 m/min.) | ||||
|
|
|
|
|
|
| |||
Weight |
|
|
| 4.2 kg |
| 5 kg | |||
|
|
|
|
|
|
|
|
|
|
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES |
| |
(1) | Screwdriver ................................................................ | 1 |
(2) | Wrench ....................................................................... | 1 |
(3) | Oil Feeder (only for | 1 |
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
(1)Chain Saw Oil
(2)Round File
(3)Depth Gauge Jointer
Round File and Depth Gauge Jointer are to be used for sharpening of chain blades. As to its application, please refer to the item titled “Sharpening of chain blade”.
(4)Chain Case
Always keep the chain cover on the chain while carrying the chain saw or while storing it.
Optional accessories are subject to change without notice.
APPLICATION
General wood cutting.
3.Extension cord
When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.
4.Confirm the chain tension
Improper chain tension may result in damage to the chain and the guide bar, and could cause serious accident. Always confirm that there is proper tension on the chain prior to operation.
5.Fill the oil tank with oil
This unit is shipped without oil in the oil tank. Prior to operation, remove the oil cap and fill the tank with accessory oil.
This unit is shipped without oil in the oil tank. Prior to operation, remove the oil cap and fill the tank with chain saw oil (sold separately), or SAE 20 or 30 motor oil. (CS35B)
Do not use stained or degraded motor oil. Check oil reservoir periodically and keep it filled while running saw.
6.Oiling the guide bar and chain
By pushing the oil button, oil is supplied to the guide bar and chain. Before starting cutting work, turn on the saw and push the oil button 3 or 4 times to ensure that oil is well circulated.
Automatic chain lubrication (CS35B)
7.It is recommended to use an
PRIOR TO OPERATION
1.Power source
Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.
2.Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident.
ADJUSTING THE CHAIN TENSION
1.Loosen the bolt securing the chain cover with the accessory wrench, as shown in Fig. 1. It is not necessary to remove the bolt.
2.While lifting the tip of the guide bar, turn the adjusting screw with the accessory
6