WHAT IS WHAT?
1.Throttle lever: Device activated by the operatorʼs finger, for controlling the engine speed.
2.Throttle lever lockout: Device that prevents the accidental operation of the throttle lever until manually released.
3.Stop switch: Device for allowing the engine to be started or stopped.
4.Oil tank cap: For closing the oil tank.
5.Recoil starter: Pull handle to start the engine.
6.Front handle: Support handle located at or towards the front of the engine housing.
7.Fuel tank cap: For closing the fuel tank.
8.Choke lever: Device for enriching the fuel/air mixture in the carburetor, to aid starting.
9.Priming pump; Device for supplying extra fuel, to aid starting.
10.Decompression valve: Device for reducing the compression pressure to aid starting.
11.Guide bar: The part that supports and guides the saw chain.
12.Saw chain: Chain, serving as a cutting tool.
13.Chain brake (Front hand guard): Device for stopping or locking the chain.
14.Spiked bumper: Device for acting as a pivot when in contact with a tree or log.
15.Chain catcher: Device for restraining the saw chain.
16.Guide bar cover: Device for covering the guide bar and saw chain when the unit is not being used.
17.Combi box spanner: The tool for removing or installing a spark plug and tensioning the saw chain.
18.Handling instructions: Included with unit. Read before operation and keep for future reference to learn proper, safe techniques.
English
|
| 10 |
| 13 |
2 |
|
|
| |
|
|
| 12 | |
|
|
|
| |
8 | 9 | 15 | 14 | 11 |
|
6
5
1
4 | 7 | 3 |
|
165
167
18
WARNINGS AND SAFETY INSTRUCTIONS
Operator safety
○ Always wear a safety face shield or goggles.
○ Gloves should be used when sharpening chain.
○ Always wear safety protective equipment such as jacket, trousers, gloves, helmet, boots with steel
Secure hair so it is above shoulder length.
○ Do not operate this tool when you are tired, ill or under the influence of alcohol, drugs or medication.
○ Never let a child or inexperienced person operate the machine. ○ Wear hearing protection. Pay attention to your surroundings.
Be aware of any bystanders who may be signaling a problem. Remove safety equipment immediately upon shutting off engine.
○ Wear head protection.
○ Never start or run the engine inside a closed room or building. Breathing exhaust fumes can kill.
○ For respiratory protection, wear a protection mask while emitting the chain oil mist and dust from sawdust.
○ Keep handles free of oil and fuel.
○ Keep hands away from cutting equipment.
○ Do not grab or hold the unit by the cutting equipment.
○ When the unit turned off, make sure the cutting attachment has stopped before the unit is set down.
○When operation is prolonged, take a break from time to time so that you may avoid possible
○The operator must obey the local regulations of cutting area.
WARNING
○Antivibration systems do not guarantee that you will not sustain
○Long or continuous exposure to high noise levels may cause permanent hearing impairment. Always wear approved hearing protection when operating a unit/machine.
○If you are using any medical electric/electronic devices such as a pacemaker, consult your physician as well as the device manufacturer prior to operating any power equipment.
Unit/machine safety
○ Inspect the entire unit/machine before each use. Replace damaged parts. Check for fuel leaks and make sure all fasteners are in place and securely tightened.
○ Replace parts that are cracked, chipped or damaged in any way before using the unit/machine.
○ Make sure the side case is properly attached.
○ Keep others away when making carburetor adjustments.
○ Use only accessories as recommended for this unit/machine by the manufacturer.
○ Never let the chain strike any obstacle. If the chain makes contact, the machine should be stopped and checked carefully.
3