English

OPTIONAL ACCESSORIES (sold separately)

1. Battery

CAUTION

Never short-circuit the battery.

2.Battery installation

Insert the battery while observing its polarities (see Fig. 2).

CHARGING

<BSL1430><BSL1830>

Optional accessories are subject to change without notice.

APPLICATIONS

￿Drilling of brick and concrete block, etc.

￿Driving and removing of machine screws, wood screws, tapping screws, etc.

￿Drilling of various metals

￿Drilling of various woods

BATTERY REMOVAL/INSTALLATION

1.Battery removal

Hold the handle tightly and push the battery latch (2 pcs.) to remove the battery (see Figs. 1 and 2).

Before using the impact driver drill, charge the battery as follows.

1.Connect the charger’s power cord to a receptacle. When the power cord is connected, the charger’s pilot lamp will blink in red. (At 1-second intervals)

2.Insert the battery into the charger.

Firmly insert the battery into the charger until the line is visible, as shown in Fig. 3,4 .

3.Charging

When inserting a battery in the charger, charging will commence and the pilot lamp will light continuously in red.

When the battery becomes fully recharged, the pilot lamp will blink in red. (At 1-second intervals) (See

Table 1)

(1)Pilot lamp indication

The indications of the pilot lamp will be as shown in Table 1, according to the condition of the charger or the rechargeable battery.

Table 1

 

 

 

 

 

 

Indications of the pilot lamp

The

 

Before

 

Blinks

Lights for 0.5 seconds. Does not light for 0.5

 

 

pilot

 

charging

 

 

 

seconds. (off for 0.5 seconds)

lamp

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

lights or

 

While

 

Lights

Lights continuously

blinks in

 

 

red.

 

charging

 

Blinks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lights for 0.5 seconds. Does not light for 0.5

 

 

Charging

 

 

 

complete

 

 

 

seconds. (off for 0.5 seconds)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Charging

 

Flickers

Lights for 0.1 seconds. Does not light for 0.1

 

 

impossible

 

 

 

seconds. (off for 0.1 seconds)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lights

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The

 

Overheat

 

Lights continuously

pilot lamp

 

standby

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

lights in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

green.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Malfunction in the battery or the charger

Battery overheated. Unable to charge. (Charging will commence when battery cools)

(2)Regarding the temperatures of the rechargeable battery

The temperatures for rechargeable batteries are as shown in Table 2, and batteries that have become hot should be cooled for a while before being recharged.

Table 2 Recharging ranges of batteries

Temperatures at which the

Rechargeable batteries battery can be recharged

BSL1430, BSL1830

0°C - 40°C

(3)Regarding recharging time

Depending on the combination of the charger and batteries, the charging time will become as shown in Table 3.

9