English
Before storing a battery, remove any swarf and dust that may adhere to it and do not store it together with metal parts (screws, nails, etc.).
2.Do not pierce battery with a sharp object such as a nail, strike with a hammer, step on, throw or subject the battery to severe physical shock.
3.Do not use an apparently damaged or deformed battery.
4.Do not use the battery in reverse polarity.
5.Do not connect directly to an electrical outlets or car cigarette lighter sockets.
6.Do not use the battery for a purpose other than those specified.
7.If the battery charging fails to complete even when a specified recharging time has elapsed, immediately stop further recharging.
8.Do not put or subject the battery to high temperatures or high pressure such as into a microwave oven, dryer, or high pressure container.
9.Keep away from fire immediately when leakage or foul odor are detected.
10.Do not use in a location where strong static electricity generates.
11.If there is battery leakage, foul odor, heat generated, discolored or deformed, or in any way appears abnormal during use, recharging or storage, immediately remove it from the equipment or battery charger, and stop use.
CAUTION
1.If liquid leaking from the battery gets into your eyes, do not rub your eyes and wash them well with fresh clean water such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause
2.If liquid leaks onto your skin or clothes, wash well with clean water such as tap water immediately. There is a possibility that this can cause skin irritation.
3.If you find rust, foul odor, overheating, discolor, deformation, and/or other irregularities when using the battery for the first time, do not use and return it
to your supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal of lithium ion battery, the battery may be shorted, causing fire. . When storing the lithium ion battery, obey surely the rules of following contents.
Do not place conductive debris, nail and wires such as iron wire and copper wire in the storage case.
To prevent shorting from occurring, load the battery in the tool or insert securely the battery cover for storing until the ventilator is not seen.
SPECIFICATIONS
POWER TOOL
Model |
| DV14DSL | DV18DSL | |
0 – 5600 / 0 – 19600 | ||||
|
| Brick | 13 mm | |
|
| (Depth 30 mm) | ||
|
|
|
| |
Capacity | Drilling | Wood | 36 mm | |
|
| (Thickness 18 mm) |
|
|
|
| Metal | Steel: 13 mm, | |
|
| (Thickness 1.6 mm) | Aluminum: 13 mm | |
|
| Machine screw | 6 mm | |
| Driving | Wood screw | 6.8 mm (diameter) ⋅ 50 mm (length) | 8 mm (diameter) ⋅ 75 mm (length) |
|
| (Requires a pilot hole) | (Requires a pilot hole) | |
|
|
| ||
Rechargeable battery | BSL1430: | BSL1830: | ||
Weight |
| 1.7 kg | 1.8 kg | |
|
|
|
|
|
CHARGER
Model | UC18YRSL |
Charging voltage | 14.4 V 18 V |
Weight | 0.6 kg |
STANDARD ACCESSORIES |
|
| |
| 1 Plus driver bit (No. | 2 ⋅ 65L) ...... | 1 |
| 2 Charger (UC18YRSL) ............................ | 1 | |
DV14DSL | 3 Battery ............................................... | 2 | |
(2LSCK) | (DV14DSL:BSL1430, DV18DSL:BSL1830) |
| |
DV18DSL |
|
|
|
(2LSCK) | 4 Plastic case ....................................... | 1 | |
| 5 Battery cover .................................... | 1 | |
DV14DSL (NN) | Charger, Battery, Plastic case and |
| |
DV18DSL (NN) | battery cover are not | contained. |
|
Standard accessories are subject to change without notice.
8