English
47
REMOVING DISC
1Press down th e DISC
EJECT button once and
release it.
In a moment, the cover
of disc insertion block
will open.
If the DVD video
camera/recorder is on
at this time, the
“EJECT” indicator will blink on the LCD
monitor or in the viewfinder.
2Gently open the cover
fully until it stops.
3Remove the disc.
While pushing down the center portion of
turntable, pick up the disc, holding its edge,
to remove it.
4Gently pu s h the section
indicated “PU S H CLOSE”
on the cover of disc
insertion block, to close the
cover.
Note:
•Do not remove the battery or disconnect the A C
adapter/charger during removal of the disc or until
power is completely turned off: If you do, the disc
cover will not open. If this happens, reattach the
battery or AC adapter/charger, push down the DIS C
EJECT button once, and then release it.
•Do not insert anything other than the 8 cm DVD-RAM
or DVD-R disc into the disc insertion block: Doing so
could cause malfunctions.
•When inserting or removing the disc, BE SURE NOT
to look into the lens in laser pickup: Doing so could
damage your eyesight.
•If the battery remaining level runs out, set the power
switch to “OFF” to remove the disc (see page 42).
DISC EJECT
Turntable