English

DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY

WARNING: Never attempt to assemble or disassemble the depressed center wheel, unless the power switch is in the “OFF” position and the electrical cord has been disconnected from the receptacle.

1. Assembly

(1)Turn the disc grinder upsidedown so that the spindle is facing upward.

(2)Align the oval-shaped indentation of the wheel washer with the notched part of the spindle, then attach them.

(3)Fit the protuberance of the depressed center wheel onto the wheel washer.

(4)Screw the wheel nut onto the spindle.

(5) While pushing the push button with one

Wrench

 

hand, lock the spindle by turning the

Wheel Nut

Tighten

depressed center wheel slowly with the

Depressed Center

other hand.

 

Tighten the wheel nut by using the supplied

Wheel

 

wrench as shown in Fig. 5.

Wheel Washer

 

 

 

CAUTION: Tighten the wheel nut securely

 

 

and confirm that the depressed

Spindle

 

center wheel does not wobble.

 

 

 

2. Disassembly

Wheel

 

Guard

 

To remove the depressed center wheel,

Push

 

simply reverse the above-mentioned

 

Button

procedure.

 

 

 

Fig. 5

 

13