English
CAUTION:
●The revolving depressed center wheel will create air turbulence.
Do no lay the grinder down in areas of dust or dirt until it has come to a complete stop.
DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY
WARNING: Never attempt to assemble or disassemble the depressed center wheel, unless the power switch is in the “OFF” position and the electrical cord has been disconnected from the receptacle.
1.Assembly
(1)Turn the disc grinder upsidedown so that the spindle is facing upward.
(2)Align the
(3)Fit the protuberance of the depressed center wheel onto the wheel washer.
(4)Screw the wheel nut onto the spindle.
(5) While pushing the push button with | Wrench | |
one hand, lock the spindle by turning | ||
|
the depressed center wheel slowly with | Tighten |
the other hand. | Wheel Nut |
Tighten the wheel nut by using the |
|
supplied wrench as shown in Fig. 5. |
|
CAUTION:
●Tighten the wheel nut securely and confirm
that the depressed center wheel does not wobble.
2. Disassembly
To remove the depressed center wheel, simply reverse the
Spindle
Push
Button
Fig. 5
14
