English

 

No. of carbon

Wear limit

brush

 

38

0.24” (6mm)

0.67” (17mm)

Fig. 6

CAUTION:

Using this grinder with a carbon brush which is worn in excess of the wear limit will damage the motor.

NOTE:

Use HITACHI carbon brush No. 38 indicated in Fig. 6.

￿Replacing carbon brushes:

Remove the brush caps (Fig. 1) with a slotted screwdriver. The carbon brushes can then be easily removed.

5.Service and repairs

All quality power tools will eventually require servicing or replacement of parts because of wear from normal use. To assure that only authorized replacement parts will be used, all service and repairs must be performed by a HITACHI AUTHORIZED SERVICE CENTER, ONLY.

6.Service parts list

CAUTION:

Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.

This Parts List will be helpful if presented with the tool to the Hitachi Authorized

Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.

MODIFICATIONS:

Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements.

Accordingly, some parts may be changed without prior notice.

ACCESSORIES

WARNING:

Never use any accessories other than those mentioned below.

The use of any accessories other than those mentioned below or attachments not intended for use such as cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property damage.

NOTE:

Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

 

￿ Wrench (Code No. 937913Z) ................................

1

￿

Hexagonal bar wrench (Code No. 872422) .........

1

￿

Side Handle (Code No. 322411) ...........................

1

OPTIONAL ACCESSORIES...sold separately

￿Depressed center wheel (10pcs. per package) 7" (180 mm) external dia. ⋅ 1/4" (6 mm) thickness ⋅ 7/8" (22 mm) hole dia.

(Code No. 701070)

9" (230 mm) external dia. ⋅ 1/4" (6 mm) thickness ⋅ 7/8" (22 mm) hole dia.

(Code No. 701090)

NOTE:

Specifications are subject to change without any obligation on the part of the HITACHI.

14