English

WARNINGS AND SAFETY

INSTRUCTIONS

Operator safety

○Always wear a safety face shield or goggles.

○Always wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair so it is above shoulder length.

○Do not operate this tool when you are tired, ill or under the influence of alcohol, drugs or medication.

○Never let a child or inexperienced person operate the machine.

○Wear hearing protection. Pay attention to your surroundings. Be aware of any bystanders who may be signaling a problem. Remove safety equipment immediately upon shutting off engine.

○Wear head protection.

○Never start or run the engine inside a closed room or building. Breathing exhaust fumes can kill.

○Keep handles free of oil and fuel.

○Keep hands away from cutting equipment.

○Do not grab or hold the unit by the cutting equipment.

○When the unit is turned off, make sure the cutting attachment has stopped before the unit is set down.

○When operation is prolonged, take a break from time to time so that you may avoid possible Hand-Arm Vibration Syndrome (HAVS) which is caused by vibration.

WARNING

●Antivibration systems do not guarantee that you will not sustain Hand-Arm Vibration Syndrome or carpal tunnel syndrome. Therefore, continual and regular users should monitor closely the condition of their hands and fingers. If any symptoms of the above appear, seek medical advice immediately.

●If you are using any medical electric/ electronic devices such as a pacemaker, consult your physician as well as the device manufacturer prior to operating any power equipment.

Unit/machine safety

○Inspect the entire unit/machine before each use. Replace damaged parts. Check for fuel leaks and make sure all fasteners are in place and securely tightened.

○Replace parts that are cracked, chipped or damaged in any way before using the unit/ machine.

○Make sure the safety guard is properly attached.

○Keep others away when making carburetor adjustments.

○Use only accessories as recommended for this unit/machine by the manufacturer.

WARNING

Never modify the unit/machine in any way. Do not use your unit/machine for any job except that for which it is intended.

Fuel safety

○Mix and pour fuel outdoors and where there are no sparks or flames.

○Use a container approved for fuel.

○Do not smoke or allow smoking near fuel or the unit/machine or while using the unit/machine.

○Wipe up all fuel spills before starting engine.

○Move at least 10 ft (3 m) away from fueling site before starting engine.

○Stop engine before removing fuel cap.

○Empty the fuel tank before storing the unit/ machine. It is recommended that the fuel be emptied after each use. If fuel is left in the tank, store so fuel will not leak.

○Store unit/machine and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces. etc.

WARNING

Fuel is easy to ignite or get explosion or inhale fumes, so that pay special attention when handling or filling fuel.

Cutting safety

○Do not cut any material other than grass and brush.

○Inspect the area to be cut before each use. Remove objects which can be thrown or become entangled.

○For respiratory protection, wear an aerosol protection mask when cutting the grass after insecticide is scattered.

○Keep others including children, animals, bystanders and helpers outside the 50 ft (15 m) hazard zone. Stop the engine immediately if you are approached.

○Always keep the engine on the right side of your body.

○Hold the unit/machine firmly with both hands.

○Keep firm footing and balance. Do not over- reach.

4