Hitachi KP-FD202GV specifications Specification of Digital output connector

A

B

C

D

E

F

1 2 3 4

6. Specification of Digital output connector
(1) Gigabit Ethernet connector				A
PIN NO.	Signal		LED1	LED2
1	TRP1+
2	TPR1-
3	TRP2+
4	TPR3+
5	TRP3-
6	TRP2-
7	TRP4+			B
8	TRP4-
Connector: RJ-45
*LED Status
STATUS		LED1(Green)	LED2 (Yellow)
Power ON		Light Off	Light On
Transmission		Blink On	Light On
Transmission pause		Light Off	Light On
				C
(2) 12-pin connector
PIN NO.	Signal	PIN NO.	Signal
1	GND (+12V)	7	TRIG-A / VD (H)
2	+12V	8	TRIG-B (C)
3	GND	9	TRIG-B (H)
4	AUX	10	FLASH / VD OUT
5	GND	11	N.C.	D
6	N.C.	12	TRIG-A / VD (C)
Connector (camera side)		: SAMWOO SNH-10-12 (RPCB) or equivalent
Plug (matching cable plug) : Hirose HR10A-10P-12S (01) or equivalent

Please do not unplug and insert cable (camera cable) with a power supplied to a camera. Install clamp filter (ZCAT 2035-0930A: TDK) at both ends (camera and video processor

ends) in the CE marking legion.

E

Please do not connect 1 pin and 3/5 pin when using PoE. When connecting it, PoE may stop the power supply. Because TRIG-A/VD and TRIG-B are photo coupler input, 8/12 pin is isolated with 1/3/5 pin. When 8/12 pin is connected to GND, please connect to 3 pin or 5 pin.

Note: Please do not input any signal to N.C. pin because machine may break down.

F

		DWG.	SHEET
			5
		No.
			9
1	2	3	4
			DF022-4PE-S1