Connection

Connecting Antenna Cable

Connect the 75 ohm coaxial cable (commerically available) to the antenna input terminal.

ss To obtain better picture quality, use an outdoor antenna.

ssIf your outdoor antenna uses 75 ohm coaxial cable with an F-type connector, connect it directly to the antenna input terminal at the rear panel.

ssIf your outdoor antenna uses flat cable, connect it with a 75 ohm adapter (commercially available) and then to the antenna input terminal at the rear panel.

Connecting External Equipment

You can select the appropriate connection depending on the equipment that you are connecting and the

level of picture quality you are trying to achieve. To view external source images, press to select input source. ( page 15)

ss Please refer to the user manual of the external equipment for more information on the connection to the TV.

ssPlease disconnect all the power supplies to the external equipment and TV before connection.

ssThe illustration used here is based on model L32EC05AU. There may be a slight difference in the illustration, if you are using model L42EC05AU.

To use HDMI terminal

ss The HDMI cable connector should

 

not exceed 20mm in width (W) and

 

10mm in height (H).

W

H

HDMI Device

HDMI OUT

or or

(rear)(side)

If the external equipment has DVI output, you can connect it to the HDMI terminal using a HDMI-DVI cable. In case of using the HDMI-DVI cable, connect analogue audio signal to RGB audio input terminal.

or

or

 

 

 

 

DVI OUT

 

 

 

 

 

 

 

DVI Device

L

AUDIO

OUT

R

(rear)(side)

To use Component Video terminal

Y

 

 

PB

COMPONENT

 

VIDEO OUT

[Example]

 

PR

 

DVD Player

 

 

 

L

 

 

 

AUDIO

 

 

 

OUT

(rear)

 

 

R

(side)

13