English

SAFETY

IMPORTANT SAFETY INSTRUCTIONS - FOR USING NAILERS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

General

To reduce the risks of electric shock, fire, and injury to persons, READ ALL THE INSTRUCTIONS BEFORE

USING THE TOOL.

DANGER

1. OPERATORS AND OTHERS

IN WORK AREA

The employer must enforce the use of safety glasses

MUST WEAR EYE PROTECTION (SAFETY

by the Nailer operator and others in work area.

GLASSES WITH SIDE SHIELDS).

2. NEVER USE OXYGEN OR OTHER BOTTLED

 

When operating the Nailer, always wear

 

 

safety glasses with side shields, and

GASES. EXPLOSION MAY OCCUR.

 

make sure others in work area wear

Never use oxygen, combustible gases

 

safety glasses, too.

 

or any other bottled gases as a power

 

Safety glasses must conform to the

source for the Nailer.

 

requirements of

American National

Use of the above gases is dangerous, as

 

Standards Institute, ANSI Z87.1 and

the Nailer will explode.

 

provide protection against flying particles

Use only clean, dry, regulated

 

both from the front and side.

compressed air.

WARNING

3.NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA.

Always assume that the Nailer contains fasteners.

Never point the Nailer toward yourself or others, whether it contains fasteners or not.

If fasteners are mistakenly driven, it can lead to severe injuries.

Never engage in horseplay with the Nailer.

Respect the Nailer as a working implement.

4.DO NOT PLACE FINGER ON TRIGGER AND KEEP FINGER AWAY FROM THE TRIGGER WHEN NOT DRIVING FASTENERS TO AVOID ACCIDENTAL FIRING.

Never carry the Nailer with finger on Trigger since you could drive a fastener unintentionally and injure yourself or someone else.

Always carry the Nailer by the handle only.

5.CHOICE OF TRIGGERING METHOD IS IMPORTANT.

Read and understand section titled “METHODS OF OPERATION.” (pages 14 – 16)

6.DO NOT MAKE CONTACT WITH SAFETY TIP (PUSH LEVER) WHEN NOT DRIVING FASTENERS.

4