English
SAFETY — Continued
WARNING
(4)Check Push Lever before use. Make sure the Push Lever operates properly. (The Push Lever may be called “Safety”.) Never use the Nailer unless the Push Lever is operating properly, otherwise the Nailer could drive a fastener unexpectedly. Do not tamper with or remove the Push Lever, otherwise the Push Lever becomes inoperable.
(5)Keep all screws and covers tightly in place. Keep all screws and covers tightly mounted.
Check their condition periodically. Never use the Nailer if parts are missing or damaged.
(6)Do not load fasteners with Trigger or Push Lever depressed. When loading fasteners into the Nailer or when connecting the air hose,
1)do not depress the Trigger;
2)do not depress the Push Lever; and
3)keep the Nailer pointed downward.
(7)Keep hands and feet away from firing head during use. Never place your hands or feet closer than 8 inches (200 mm) from the firing head. A serious injury can result if the fasteners are deflected by the workpiece, or are driven away from the point of entry.
(8)Do not drive fasteners into thin boards or near corners and edges of workpiece.
The fasteners can be driven through or away from the workpiece and hit someone.
(9)Never drive fasteners from both sides of a wall at the same time. The fasteners can be driven into and through the wall and hit a person on the opposite side.
(10)Check for live wires. Avoid the risk of severe electrical shock by checking for live electrical wires that may be hidden by walls, floors or ceilings. Turn off the breaker switch to ensure there are no live wires.
(11)Never carry Nailer by hose.
(12)Do not disconnect air hose from Nailer with finger on Trigger. The Nailer can fire when re- connected to An air supply.
(13)Handle Nailer correctly. Operate the Nailer according to this Manual. Never allow the Nailer to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.
(14)Never use Nailer for applications other than those specified in this manual.
(15)Never modify or alter a Nailer. Doing so may cause it to malfunction and personal injuries may result.
(16)Do not remove Dust Cover. Fragments of wire collating fasteners can fly out.
EMPLOYER’S RESPONSIBILITIES
1.Ensure that this MANUAL is available to operators and personnel performing maintenance.
2.Ensure that Nailers are used only when operators and others in work area are wearing EYE PROTECTION.
3.Enforce the use of EYE PROTECTION by operators and others in work area.
4.Keep Nailers in safe working order.
5.Maintain Nailers properly.
6.Ensure that Nailers which require repair are not further used before repair.
SAVE THIS MANUAL AND
KEEP IT AVAILABLE FOR OTHERS!
7