English
(2) Adjust the air pressure to 70 psi (4.9 bar 5 kgf/cm2). Connect the air hose.
(3)REMOVE ALL NAILS FROM NAILER.
DO NOT push or rest Push Lever against any surface or Switching device will not turn.
DO NOT FORCE OR USE TOOLS TO TURN SWITCHING DEVICE.
Move Switching device completely to the leftward position (SINGLE SEQUENTIAL ACTUATION MECHANISM).
Leftward position
Switching device
□THE NAILER MUST NOT LEAK AIR.
(4)Remove the finger from the trigger and press the push lever against the wood.
□THE NAILER MUST NOT OPERATE.
Do not pull Trigger 
Depress Push Lever
(5)Separate the push lever from the wood.
Next, point the nailer downward, pull the trigger and then wait in that position for 5 seconds or longer.
□ THE NAILER MUST NOT OPERATE.
Pull Trigger
(6)First pull the Trigger.
Next, depress the Push Lever against the wood.
□THE NAILER MUST NOT OPERATE.
(7)Without touching the Trigger, depress the Push Lever against the wood.
Next, pull the Trigger.
□THE NAILER MUST OPERATE.
Rightward position 
Switching device
(8)REMOVE ALL NAILS FROM NAILER.
DO NOT push or rest Push Lever against any surface or Switching device will not turn.
DO NOT FORCE OR USE ANY TOOLS TO TURN SWITCHING DEVICE.
Move Switching device completely to the rightward position (CONTACT ACTUATION MECHANISM).
(9)With the Nailer off the wood, pull the Trigger. Next, depress the Push Lever against the wood.
□THE NAILER MUST OPERATE.
(10)Next, depress the Push Lever against the workpiece. Now pull the Trigger.
□THE NAILER MUST OPERATE.
(11)If no abnormal operation is observed, you may load nails in the Nailer.
Drive nails into the workpiece that is the same type to be used in the actual application.
□THE NAILER MUST OPERATE PROPERLY.
12