WARNING
●For intermittent operation, set the switching device to the leftward position completely. (i.e. Set to SINGLE SEQUENTIAL ACTUATION MECHANISM.)
●To avoid double firing or accidental firing due to recoil.
1)Set the switching device to SINGLE SEQUENTIAL ACTUATION MECHANISM.
2)Pull the trigger rapidly and firmly.
1 Set the switching device to the leftward position (to set to SINGLE SEQUENTIAL ACTUATION MECHANISM).
(Set the switching device to the leftward position completely as shown in the diagram. Otherwise, it will be set to CONTACT ACTUATION MECHANISM.)
2 Position the nail outlet on the workpiece with finger off the trigger.
3 Depress the push lever firmly until it is completely depressed.
4 Pull the trigger to drive a nail.
5 Remove finger from the trigger.
To continue nailing in a separate location, move the nailer along the wood, repeating steps 2– 5as required.
1Leftward position
English
WARNING
●A nail will fire each time the trigger is depressed as long as the push lever remains depressed.
(2)Continuous operation (Push lever fire) Using CONTACT ACTUATION MECHANISM
WARNING
● To avoid double firing or accidental firing due to recoil.
1) Do not press the nailer against the wood with excessive force.
2) Separate the nailer from the wood as it recoils after nailing.
1 Set the switching device to the rightward position (to set to CONTACT ACTUATION MECHANISM). (Set the switching device to the rightward position completely as shown in the diagram. Otherwise, it will not operate properly.)
2 Pull the trigger with the Nailer off the workpiece. 3 Depress the push lever against the workpiece to
drive a nail.
4 Move the Nailer along the workpiece with a bouncing motion.
Each depression of the push lever will drive a nail. As soon as the desired number of nails have been driven, remove finger from the trigger.
Switching device |
| |
Trigger | 1Rightward position | |
Switching device | ||
| ||
| Previously pull the trigger |
4 3 
Push Lever | 4 | 2 |
|
|
15