English
MAINTENANCE
NOTE: The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer. Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer.
MAINTENANCE AND INSPECTION
Read section titled “SAFETY” (pages 4 – 7).
WARNING
●Disconnect air hose and remove all nails from Nailer when:
1)doing maintenance and inspection; and
2)clearing a jam.
1.Inspecting the magazine
DISCONNECT AIR HOSE.
Clean the magazine. Remove plastic tips or wooden tips which may have accumulated in the magazine.
Lubricate it with Hitachi pneumatic tool lubricant.12
Nail Feeder Ass'y | Magazine | 1 Disconnect |
| air hose | |
|
|
CAUTION
● Check that the main nail stopper and sub nail stopper slide smoothly by pushing them with finger.
If not smooth, nails can be driven at an irregular angle and hurt someone.
2.Storing
○When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.
○Do not store the Nailer in a cold weather environment.
Keep the Nailer in a warm area.
○When not in use, the Nailer should be stored in a warm and dry place.
Keep out of reach children.
3.WARNING LABEL
Change the WARNING LABEL if missing or damaged.
A new WARNING LABEL is available from a Hitachi authorized service center.
Warning
Label
4.Maintenance chart (See page 19)
5.Operator troubleshooting (See page 19)
6.Service parts list
CAUTION
● Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
17