THE PUSH LEVER AND TRIGGER MUST MOVE SMOOTHLY with pulling back the feeder knob.
Trigger
Push lever
Feeder knob
(2)Installing the battery.
Do not operate the push lever or trigger while installing the battery.
Make sure the battery indicator light is flashing green. If the battery indicator light is flashing red, the battery doesn’t have enough power and it needs to be charged.
Handle
Latch
Insert
Pull out
Battery
BATTERY INDICATOR LIGHT
Flashing GREEN: Enough power remaining (The light turns steady during operation).
Flashing RED: Insufficient power remaining (The light turns steady during operation).
OFF: The battery is extremely empty. Charge the battery.
English
2Insert the fuel cell into nailer.
Fuel cell 
3Insert the stem of fuel cell into the hole of adaptor.
Adapter 
Stem
Fuel cell
Adapter Stem
Fuel cell
NOTE: Insert a loose adapter according to the instructions in the figure.
Insert into the hole
Adapter
4 Close the cell cover. Cell cover
Battery indicator light
(3) INSERT FUEL CELL INTO NAILER.
1Pulling the latch and open the cell cover. Latch
Cell cover
(4)Remove the finger from the trigger and press the push lever against the workpiece with pulling back the feeder knob.
THE NAILER MUST NOT OPERATE.
Depress push lever
Do not pull trigger Feeder knob
— 15 —