English

￿When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.

￿Do not store the Nailer, fuel cell and battery in a cold weather environment. Keep them in a warm area.

￿When not in use, the Nailer, fuel cell and battery should be stored in a warm and dry place.

Keep it out of reach of children.

3.WARNING LABEL

Change the WARNING LABEL if missing or damaged.

A new WARNING LABEL is available from a Hitachi authorized service center.

Warning label

4.Maintenance chart (See page 33)

5.Operator troubleshooting (See pages 33 – 34)

6.Service parts list

CAUTION

￿Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.

MODIFICATIONS:

Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements.

Accordingly, some parts may be changed without prior notice.

<Battery charger>

1.Check the Screws

Loose screws are dangerous. Regularly inspect them and make sure they are tight.

CAUTION

￿Using this battery charger with loosened screws is extremely dangerous.

2.Check for Dust

Dust may be removed with a soft cloth or a cloth dampened with soapy water. Do not use bleach, chlorine, gasoline or thinner, for they may damage the plastics.

3.Fuse replacement of cigarette lighter connecting plug

CAUTION

￿For continued protection against risk of fire, replace only with same type and ratings of fuse in cigarette lighter connecting plug.

250V, 6A, DC

4.Storage

Storing in a place below 104°F (40°C) and out of the reach of children.

SERVICE AND REPAIRS

WARNING

￿Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer.

￿Use only parts supplied or recommended by Hitachi for repair.

All quality Nailers will eventually require servicing or replacement of parts because of wear from normal use.

NOTE:

Specifications are subject to change without any obligation on the part of

HITACHI.

32