English
MAINTENANCE
NOTE:
The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer.
Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer.
MAINTENANCE AND
INSPECTION
<Nailer>
Read section titled “SAFETY” (pages 5 – 12).
DANGER
Never use and test in presence of flammable liquids or gases.
Keep away from ignition source.
No smoking.
WARNING
Remove fuel cell, battery and all nails from Nailer when:
1)doing maintenance and inspection; and
2)clearing a jam.
1.Inspecting the magazine
1REMOVE FUEL CELL and BATTERY.
2Clean the magazine. Remove dust and wooden chips which may have accumulated in the magazine. Lubricate it with Hitachi Gas tool lubricant.
Cloth
CAUTION
Check that the nail feeder slides smoothly by pulling it with finger.
If not smooth, nails can be driven at an irregular angle and hurt someone.
2. Storing
DANGER
| Store | Nailer |
| properly with fuel | |
| cell and battery | |
| removed. |
|
| The fuel cell is an | |
| a e r o s o l | |
| dispensers with | |
| f l a m m a b l e | |
| ||
| contents. |
|
120°F MAX | When not in use, | |
(50°C) | the Nailer, fuel | |
| cell and battery | |
| should be stored | |
| in tool case and in | |
| a dry place. | |
| Store indoors at | |
| t e m p e r a t u r e | |
| below | 120°F |
| (50°C). |
|
31