English

USING THE NOSE CAP

WARNING

￿When attaching or detaching the nose cap, be sure to remove your finger from the trigger and remove the fuel cell and the battery from the nailer.

If you like to protect the surface of workpiece against scratches or markings made by the push lever, attach the accessory nose cap to the push lever.

1Remove the fuel cell and the battery from the nailer.

2Put the nose cap to the toe of the push lever.

3The nose cap is marked to indicate the

exit point of the nail, making alignment easier.

4When not using the nose cap, secure in the storage compartment located on the reverse side of the magazine.

Nose Cap

2Push Lever

Nose Cap

Magazine

NT65GS, NT65GA, NT65GB

Push Lever

Nose Cap

Nose Cap

Magazine

NT50GS

NOTE:

￿The nose cap may reduce nailing depth due to its thickness. Re-adjustment of nailing depth is required.

CLEARING A JAM

If nails are jammed in firing head, remove it, and adjust the nailing in the following order.

CAUTION

￿Remove the fuel cell and the battery from the Nailer.

1 Remove the fuel cell and the battery from the Nailer.

2Remove all nails.

29