English

ADJUSTING THE NAILING DEPTH

To assure that each nail penetrates to the same depth, be sure that the Nailer is always held firmly against the workpiece.

If nails are driven too deep or shallow into the workpiece, adjust the nailing in the following order.

1Remove the fuel cell and the battery from the Nailer.

Fuel cell

Battery

2If nails are driven too deep, turn the adjuster to the shallow side. Adjustments are in half-turn increments.

5Remove the fuel cell and the battery from the Nailer.

6Choose a suitable position for adjuster.

USING THE HOOK

CAUTION

￿If the tool falls, there is a risk that malfunction and/or physical damage can occur.

It is recommended that you also use fall–preventing wires, etc.

￿Incomplete installation of the hook may result in bodily injury when used.

Hook can be installed on the left or right side.

(1)Securely hold the main unit and remove the screw using a screwdriver.

2

Turn Adjuster Flush

Too Deep

(2) Remove the hook and hook plate.

2

 

Too Shallow

Turn Adjuster Flush

 

If nails are driven too shallow, turn the adjuster to the deep side.

3Stop turning the adjuster when a suitable position is reached for a nailing test.

4Connect the fuel cell and the battery to the Nailer.

ALWAYS WEAR SAFETY GLASSES. Perform a nailing test.

(3)Install the hook on the other side and securely fasten with screw.

28