English
4Lubricate the feeding surfaces of the nose and the nail guide after cleaning.
This promotes smooth operation and prevents rust.
CAUTION
● Check that the main nail stopper and sub nail stopper slide smoothly by pushing them with finger.
If not smooth, nails can be driven at an irregular angle and hurt someone.
4.Inspecting the magazine
1 DISCONNECT AIR HOSE.
2 Clean the magazine. Remove dust or wooden tips which may have accumulated in the magazine.
5.Storing
○When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.
○Do not store the Nailer in a cold weather environment.
Keep the Nailer in a warm area.
○When not in use, the Nailer should be stored in a warm and dry place.
Keep out of reach children.
6.WARNING LABEL
Change the WARNING LABEL if missing or damaged.
A new WARNING LABEL is available from a Hitachi authorized service center.
Warning
Label
7.Maintenance chart (See page 19)
8.Operator troubleshooting (See page 19)
9. Service parts list
CAUTION
● Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements.
Accordingly, some parts may be changed without prior notice.
SERVICE AND REPAIRS
WARNING
●Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer.
●Use only parts supplied or recommended by Hitachi for repair.
All quality Nailers will eventually require servicing or replacement of parts because of wear from normal use.
NOTE: Specifications are subject to change without any obligation on the part of HITACHI.
18