For Safe Handling

General Precautions on Safety

Before Using the System

Before using this product, read the operating manual careful and be sure to understand its contents.

The operating manual should be kept in a safe place near you for ready access and reference.

The system should be handled according to the procedures given in this manual.

Be sure to understand the safety-related instructions provided in this manual and heed them.

Be sure to observe the precautions indicated on the system or in the manual. Failure to heed such precautions can result in equipment damage or bodily injury.

Be sure to observe the operating instructions on the product itself and those provided in its operating manual.

Do not carry out modification of the instrument, parts replacement, use non-specified parts, nor detach safety mechanisms since this could be hazardous.

Do not perform any operation or action in any way other than as provided in this manual. When in doubt, call the designated field engineer.

The customer is responsible for proper ventilation of the room when using chemicals. Inadequate ventilation could cause a health hazard.

Most system operations are performed by viewing the monitor. Looking at the monitor continuously for long hours can cause fatigue-related eye problems. For the safe system operation involving the use of display devices, adequate labor management standards should be established and implemented.

Keep in mind that the hazard warnings in this manual or on the machine cannot cover every possible case, as it is impossible to predict and evaluate all circumstances beforehand. Be alert and use your common sense.

The above instructions should be observed strictly. Failure to do so can result not only in improper specimen observation and evaluation, but also in bodily injury.

SAFETY - 2