2.3.6

2.3.6.6Capture Control

This block is used to capture images.

Fig. 2.3-15 Capture Control Unit

Captures an image with pre-specified image resolution and scanning speed.

Displayed figures on the capture button (the number 640 in the above example) indicates the resolution of the captured image. Clicking Scan - Capture Setup, clicking the button on the Capture button, or right-clicking the Capture button brings up a Setup window, as shown below, on which you can set a scanning speed and a resolution level for the capturing process:

Fig. 2.3-16 Capture Control Unit

The capturing process runs in two modes: one in which capturing conditions can be set according to the capturing speed currently in effect (with the Scan Speed Link check ON) or one in which capturing is conducted at fixed conditions, irrespective of the scanning speed (with the Scan Speed Link check OFF).

2 - 31