b)Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation.

If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

PRECAUTION

Keep children and infirm persons away.

Whennotinuse,toolsshouldbestoredoutofreachofchildrenand infirm persons.

SPECIFICATIONS

Model

SV13YA

 

SV13YB

 

 

 

Voltage (by areas)*

(110 V, 120 V, 127 V, 220 V, 230 V, 240 V)

 

 

 

 

Power Input

 

230 W*

 

 

 

 

No-load speed

7000 – 12000 min–1

 

12000 min–1

Sanding pad size (Outer diameter)

 

125 mm

Sanding paper size (Outer diameter)

 

125 mm

 

 

 

 

Weight (without cord)

 

1.4 kg

 

 

 

 

*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

 

￿ Sanding paper ............................................................

1

￿ Dust bag ......................................................................

1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1.Sanding paper

Grain: AA40, AA60, AA80, AA120, AA180, AA240, AA320, AA400

2.Polyester buff

Optional accessories are subject to change without notice.

APPLICATIONS

￿Roughing or finishing of woodwork and metal surfaces.

￿Preliminary sanding of woodwork and metal surfaces before painting.

￿Paint removal.

￿Rust removal.

PRIOR TO OPERATION

1.Power source

Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.

2.Power switch

Ensure that the power switch is in the OFF positon. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident.

3.Extension cord

When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

4.Installing the sanding paper

Since the attachment is a hook-and-loop type, the sanding paper can be installed easily by just press- ing it onto the pad. When installing the sanding paper, in order to match it to the holes in the pad, gently fold it along the axis of two holes as shown in Fig. 1.

Next, use the holes along the fold as a guide to match the sanding paper and the pad. Finally, press the entire sanding paper uniformly onto the pad.

2