AUDIO DUBBING

AUDIO DUBBING

The audio dubbing feature lets you record new audio (sound) on a previously recorded tape without erasing the original video (picture).

When you audio dub a tape, the previous audio is erased and replaced with new sound.

NOTES:

•Sound from the built-in microphone and the AUDIO jack can be dubbed.

•When dubbing audio from the built-in microphone, set "" OUT/IN" to "OUT" and do not connect the "AUDIO" jack. When dubbing audio from the "AUDIO" jack, set "" OUT/IN" to "IN".

1. Insert a recorded tape.

Be sure that the record safety tab is not missing.

2.Place "CAM/OFF/VIDEO" to "VIDEO" position.

3.Play the tape and press "REC/PAUSE" where you want to dub audio.

• The camcorder enters the still play mode.

4.Press "DUBBING AUDIO/VIDEO" and "PLAY" at the same time.

• "A.DUB " appears in the viewfinder or LCD monitor.

NOTE: If "DUBBING AUDIO/VIDEO" and "PLAY" are pressed twice, audio and video dubbing will start. In this case, press "STOP/EJECT" to release the dubbing mode.

5.Press "REC/PAUSE" to start audio dubbing.

6.Press "STOP/EJECT" to stop audio dubbing.

NOTE: If "DISPLAY" is pressed so the display appears in the viewfinder or LCD monitor, the tape stops automatically at the reading of "0000M" and audio dubbing stops.

46