Hitachi VM-8400LA 47

AUDIO AND VIDEO DUBBING

The audio and video dubbing feature lets you record new audio (sound) and video (pictures) simultaneously on a previously recorded tape.

When you audio and video dub a tape, the previous audio and video are erased and replaced with the new sound and pictures. The replacement audio and video can be the sound and picture taken by the camera or from a video source connected to "AUDIO" and "VIDEO" on the camcorder.

NOTE: When dubbing the sound and picture from a video source, set "AV OUT/IN" to the "IN" position. When dubbing the sound and picture from the camera, set "AV OUT/IN" to 'OUT" and do not connect "AUDIO" and "VIDEO" jacks.

1. Insert a recorded tape.

Be sure that the record safety tab is not missing.

2.Place "CAM/OFF/VIDEO" in "VIDEO" position.

3.Press "DISPLAY" to display the tape counter.

4.Press "PLAY" and then "REW/REVIEW" or "F.FWD" to search to the approximate position of the tape on which you want to dub sound and picture.

5.Press "PLAY" again to search the exact position where you wish to stop dubbing and then press "REC/PAUSE" at the exact position.

6.Press "RESET" to set the tape counter reading to "0000M".

7.Press "REW/REVIEW" to rewind the tape to the approximate position from which you want to start dubbing.

8.Press "PLAY", and when the exact position to start dubbing is reached, press "REC/PAUSE".

9.Press "DUBBING AUDIO/VIDEO" and "PLAY" simultaneously twice. "A/V DUB " is displayed in the viewfinder or LCD monitor, and at the same time the picture to be dubbed appears.