Advanced Techniques

memory.

Recording Title on a Tape in the Camcorder

1.Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to CAM.

2.Locate the point of the tape where you wish to record the title ("Using Quick Edit," p 38).

3.Press the TITLE ON/OFF button on the remote control.

4.Press the Start/Stop button to start recording the title.

5.Press the TITLE ON/OFF button on the remote control to stop recording the title. The title graphics disappear from the viewfinder and the camcorder can record normally.

Note: Create and store your title before an event you plan to record. Just press the TITLE ON/OFF button on the remote control to superimpose the title over the scene as you record it. This method avoids erasing previously recorded material which will happen when you record a title on a previously recorded tape.

Note: Title recording is disabled when you connect the optional AV input cable to the AV IN/OUT jack to record video and audio from the television or VCR.

Recording a Created Title while Transferring a Tape

1.Connect the camcorder to the VCR (p30).

2.Turn on the VCR and set it to record. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO. Press PLAY on the camcorder.

3.Press the TITLE ON/OFF button on the remote control at the point on the tape where you wish to record the title.

4.Press the TITLE ON/OFF button on the remote control again to stop recording the title.

Note: Recording the title during tape transfer will erase a portion of your recorded material.

Using the Wireless Remote Control (The remote control is optional for VM-E110A)

Use the wireless remote control to operate the camcorder from a distance. The PLAY, F.FWD, REW, STOP, PAUSE (START/STOP) and ZOOM buttons on the wireless remote control operate the functions of the corresponding buttons on the camcorder. Aim the wireless remote control at the infrared ray receiver of the camera recorder.

Aiming the remote.

Note: Use the wireless remote control within the range of the infrared ray receiver of the

48