Advanced Techniques
page 30.
2.Turn on your VCR and place it in the camcorder input mode (consult your VCR manual for details). Operate the television as you normally do to see the signal coming from the VCR.
3.Hold down the red button of the CAM/OFF/VIDEO switch while you slide the switch to
VIDEO.
4.Insert the recorded tape in the camcorder and a blank tape into the VCR. Set the VCR to record.
5.Play the tape from the camcorder while recording on the VCR.
Note: If the VCR is connected to a television and the VCR/TV selector is set to VCR, you can monitor the tape being dubbed.
Using Synchro Edit (The remote control is optional for
16Use synchro edit to record only segments of a previously recorded tape when dubbing from the camcorder to a VCR. This requires an optional synchro edit cable. The Hitachi VM- E110A/E310A uses a flying erase head to eliminate glitches or rainbow noise that sometimes occurs between edits. Your VCR must have the EDIT IN jack to use the synchro edit. Synchro Edit hookup Illustration
1.Connect the synchro edit cable to the AV IN/OUT jack of your camcorder.
2.Connect the synchro edit cable to the AUDIO IN, VIDEO IN, and EDIT IN jacks of your VCR. Connect either the right or left audio plug into your VCR if it has only one AUDIO IN jack.
Turn on your VCR and place it in the camcorder input mode (consult your VCR manual for details).
3.Insert the recorded tape in the camcorder and a blank tape into the VCR.
4.Play the tape in the camcorder until you find the place you want to record. Press the Start/Stop button.
5.Press the RECORD button on the VCR. It automatically sets to pause. If the VCR begins to record instead of pausing you need to change the position of the switch on the synchro edit cable. Stop the VCR, change the position of the switch, and press the RECORD button on the VCR.
6.Press the S.EDIT button on the remote control and the last few seconds of the recorded tape reviews in the viewfinder and then the camcorder is placed in playback. The recording VCR starts recording automatically.
7.Press the F.F, REW, STOP and Start/Stop buttons to pause the VCR. You can then search forward or back through the tape without affecting the tape in the VCR.
Use the F.F and REW buttons to search the tape. Press the PLAY button to resume normal playback. To resume recording on the tape in the VCR, press the Start/Stop button and then the S.EDIT button.
To fast forward or rewind the tape, press the STOP button, then F.F or REW. To return to recording on the tape in the VCR, press the STOP button, then the PLAY button, then the Start/Stop button, and then the S.EDIT button.
8.To stop recording at a certain point turn on the camcorder's linear time counter with
50