Advanced Techniques
7.Complete the title by repeating steps 5 and 6.
8.When you complete your title, press PLAY to create a second title as required, or press the TITLE ON/OFF button on the remote control to store the title in memory and remove the title graphics from the viewfinder.
Note: As long as the correct current time can be displayed, the title is held in memory.
Correcting Errors
1.Press the TITLE ON/OFF button on the remote control.
2.Select the title with the PLAY button.
3.Use the STOP button to select the character to be corrected.
4.Use the F.FWD and REW/REVIEW buttons to correct the character.
5.Press the TITLE ON/OFF button on the remote control to store the corrected title in memory.
Recording Title on a Tape in the Camera/Recorder
1.Hold down the red button on the CAMERA/OFF/VIDEO switch while sliding the switch to CAMERA.
2.Locate the point of the tape where you wish to record the title ("Using Quick Edit," p 34).
3.Press the TITLE ON/OFF button on the remote control.
4.Use the PLAY button to select the title you wish to record.
5.Press the Start/Stop button to start recording the title.
6.Press the TITLE ON/OFF button on the remote control to stop recording the title. The title graphics disappear from the viewfinder and the camera/recorder can record normally.
Note: Create and store your title before an event you plan to record. Just press the TITLE ON/OFF button on the remote control to superimpose the title over the scene as you record it. This method avoids erasing previously recorded material which will happen when you record a title on a previously recorded tape.
Note: Title recording is disabled when you connect the optional AV input cable to the AV IN/OUT jack to record video and audio from the television or VCR.
Recording a Title while Transferring a Tape
1.Connect the camera/recorder to the VCR (p 24).
2.Press the TITLE ON/OFF button on the remote control to turn title on.
48