Advanced Techniques | - 28 - |
| |
|
|
|
|
Connecting the Extension Cable (Provided)
1.Turn the lever on the camera cable connection ring to FREE and pull out the camera cable connector in the direction of the arrow.
2. Connect the extension cable. Turn the lever in the direction of the arrow to lock the cable.
Note: Only one extension cable can be connected.
Note: Set the CAM/OFF/VIDEO switch to OFF when connecting or disconnecting the extension cable.
Note: If you set the camcorder to the camera mode without connecting the camera cable, "CAMERA" will flash on the LCD monitor. Make sure of the connection of the cable at this time.
Note: If you use the camcorder with the camera detached for playback, etc. attach the connector cap to the connection ring. Also fold the camera mounting pedestal.
Connecting the Camera Cable
1.Align the 
mark on the camera cable, 
connection lever and 
letters "FREE" on the camcorder, then push in the cable at right angles to the camcorder.
2.Set the connection lever to "LOCK".