DATE/TIME SETTING
and then press "STOP" button.
8.Repeat step 7 to select minute and AM/PM.
9.After setting AM or PM, press "STOP" button again to erase the flashing cursor and start the internal clock.
NOTE: The date/time graphics will be recorded whenever they appear in the viewfinder.
To record date/time graphics
Press the "DATE" button repeatedly to select the required date/time graphics in the viewfinder, then strat recording.
• The display changes in the following order each time the "DATE" button is pressed.
NOTE: Refer to page 29 for setting the second clock.
To correct date/time after starting the date/time
1.Press and hold "DATE" button, and then press "STOP" button. The month starts flashing.
2.Correct the incorrect digit by using "F.FWD", "REW" and "STOP" buttons.
To correct date/time during programming
1.Press "STOP" button repeatedly until the flashing cursor will be removed from the viewfinder.
2.Follow steps 1 and 2 of "To correct date/time after starting the date/time" above.
37