IDENTIFICATION AND OPERATION OF CONTROLS

Press this button to create and record personalized titles on your videos with the camera/recorder's built-in titler. (See "TITLE RECORDING" on page 32.)

28. "REVIEW" Button

Used to review the last few seconds of the recorded segment in the record/pause mode. 29. "RESET" Button

When the linear time counter is displayed in the viewfinder, pressing this button resets the counter to "0:00:00".

30. "DISPLAY" Button

When this button is pressed, the display in the viewfinder will change in sequence. 31. "DATE" Button

Press this button to display the date and time in the viewfinder. Whenever the date and time appear in the viewfinder, they will be recorded on the tape.

32. "EJECT" Button

Operates with the power on or off, if a power source is connected to the camera/recorder.

33. "" Switch

Use to select or normal for recording. This switch has no effect during playback. Normally, set it to "AUTO". "" appears in the viewfinder when the

camera/recorder is recording or playing in mode.

34. Grip Cover

Open this cover when attaching the battery or external power adapter.

35. "MIC" Switch

This switch is used to reduce noise that occurs due to wind. Place the switch in the "NORM" position for normal use.

36. Tripod Mount Screw

Use this screw to mount the camera/recorder on a tripod (generally available).

37. "BATT (Battery) EJECT" Lever

Move this lever to open the grip cover when attaching the battery or external power adapter to the camera/recorder or detaching it.

38. Camera/Recorder Control Buttons

These shaded buttons on the remote control function the same as those on the camera/recorder.

39. "PAUSE (START/STOP)" Button

When this button is pressed during recording, the tape stops and the camera/recorder enters the record/pause (stand-by) mode. When this button is pressed again, the tape runs to resume recording. This button may also be used to display a still picture during playback mode.

40. "AV DUB" Button

This button is used to record new audio and video in place of existing audio and video.

35