
IDENTIFICATION AND OPERATION OF CONTROLS
Bottom view/Remote Control Illustration
21. Power Switch
This turns the camera/recorder on and off and also switches between the camera and VCR modes. Set the switch to "CAMERA" to turn the camera's power on and to "VIDEO" to turn the VCR's power.
Press and hold the small red button in the switch to switch it. 22. "PLAY" Button
Used for playback of tapes.
NOTE: When the camera/recorder is in record/pause
23. "F.FWD" Button
Press this button during stop or rewind mode, and
Press the button during playback of tape, and the tape is played back in the forward direction approximately 9 times faster than the normal speed to confirm the recorded content.
Press "PLAY" button to return to normal playback mode or press "STOP" button to stop tape movement. Also use "F.FWD" button when setting the date/time.
NOTE: You can also visually scan forward when the camera/recorder is in record/pause
24. "REW" Button
Press this button during stop or fast forward mode, and
NOTE: You can also visually scan backward when the camera/recorder is in record/pause
25. "STOP" Button
The "STOP" button is used to stop playback, rewind, and fast forward operations. The "STOP" button has no effect during camera record operation. Also use "STOP" button when setting the date/time.
26. "PAUSE" Button
When this button is pressed in the playback mode, the tape stops and you can view a still picture. When this button is pressed again, the tape runs to resume playback.
27. "TITLE" Button
34