Getting Started (Controls)
Getting Started (Controls)
Quick Tour of the Controls
Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations.
Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too.
When you're familiar with these basic controls, proceed to Initial Setup (page 20). We'll show you how to program your local channels and set the clock to make your VCR fully functional.
How the Remote Control Works
Pressing a button on the remote control transmits an invisible beam of light (infrared) to a receiver at the right front of the VCR.
When using the remote, aim the front end toward the VCR and make sure nothing - such as a coffee table or your dog - is blocking the path of the infrared beam.
Remote Control Buttons
Remote Control Illustration
POWER Turns the VCR on and off
GUIDE Brings up an
DISPLAY Used in
CLEAR Used in
VCR/TV Switches between viewing through the VCR and not viewing through the VCR.
VOLUME Increase or decrease the audio volume.
MUTE Turns off the audio until you press MUTE again.
REW Rewinds the videotape.
PLAY Starts playing a loaded videocassette.
REC Starts recording on the station the VCR is set to.
14