1 CHANNEL

Press 1 to select the type of receiving setup you have:

<ANT>

Internal or external antenna

<CATV1>

Ordinary cable

<CATV2>

Alternate cable (if CATV1 doesn't give you the channels you

expect)

 

2 MOVIE

Press 2 to select whether you want prerecorded movies (safety tab removed) to play automatically when loaded, and then rewind, eject and turn off the power when done. Options are <ON> and <OFF>.

3 HIFI/LINEAR

Press 3 to control how the audio signal is processed by the VCR. Options are <HIFI> and <LINEAR>.

4 STEREO/MONO

Press 4 to control how the audio signal is recorded and sent to the TV. Options are <STEREO> and <MONO>.

5 SAP

Press 5 when you are ready to record a second audio program. Options are <OFF> and <ON>.

7 AUTO CHANNEL SET

Press 7 to automatically program the VCR to receive all the channels that come in on your antenna or cable.

8 ADD/ERASE CHANNEL

Press 8 to bring up a screen that lets you add new channels or limit the channels to the ones you most often watch.

Setting the Clock

This is easy to do and important for your later timed recordings.

You'll need to set the clock when first hooking up your VCR, and any time the power goes out more than 1 hour.

When you first plug in the VCR or after a power outage, the clock display will read "--:--".

To set the clock, press GUIDE, then press 1 to bring up the Clock Set screen:

Press the number buttons on the remote control to set the current time - two