TROUBLESHOOTING GUIDE | - 49 - | |
Cable Converters | Press CATV and This Number |
|
Jerrold 1 | 1 |
|
Jerrold 2 | 2 |
|
Jerrold 3 | 3 |
|
Hamlin | 4 |
|
Zenith | 5 |
|
Scientific Atlanta | 6 |
|
Pioneer | 7 |
|
Philips | 8 |
|
TO OPERATE THE CABLE BOX ONCE THE REMOTE IS
PROGRAMMED FOR IT.
1 Press CATV and then the button of the function you want.
2 Press VCR button to operate your VCR with the remote again.
TROUBLESHOOTING GUIDE
If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to remedy the problem.
SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION | |
No power. | • Power cord is not connected. | • Connect power cord to AC outlet. | |
| • The VCR power is turned off. | • Press POWER button to turn on the | |
|
| VCR. |
|
Timer recording is | • The timer recording is set incorrectly. | • Set the timer recording | |
|
|
| correctly. |
not possible. | • The VCR power is turned on. |
| • Press POWER button to turn off |
|
|
| the VCR. |
| • VCR clock is not set correctly. | • Set VCR clock correctly. | |
Recording mode | • The erase prevention tab on | • Place a plastic tape over the hole. | |
cannot be engaged. cassette is missing. |
|
| |
No picture or poor | • The TV and/or VCR is in the TV • Set your TV to the the VCR mode | ||
picture on playback.mode. | and/or press VCR/TV button so that the | ||
|
| VCR/TV indicator on the VCR comes | |
|
| on. |
|
| • The TV fine tuning is not set | • Fine tune your TV. | |
| correctly. |
|
|
Noise in picture on | • Video heads are dirty. | • Head cleaning is necessary, consult | |
playback. |
| the nearest Funai Authorized Service | |
|
| Center. | |
Playback picture is | • The tracking control is not set | • Adjust tracking control for a better | |
partially noisy. | correctly. | picture using CHANNEL or | |
|
| button. See page 16. | |
• Connections are not correctly made. | • | ||
programs cannot be |
|
| ANT.OUT connections. . |
seen. | • The TV and/or VCR is in VCR | Set your TV to the TV mode and/or | |
| mode. | press VCR/TV button so that the |