Getting Started (Initial Setup)

To set the clock manually

1.Press GUIDE, then press 3 to bring up the CLOCK SET screen. Press 1 to switch "CLOCK SET <AUTO>" of item 1 to "CLOCK SET <MANUAL>".

￿If "CLOCK SET <MANUAL>" is specified in item 1, "SET TIME ZONE" of item

3 or "SET D.S.T." of item 4 are not displayed. 2. Press 2 to bring up the following screen.

Press the number buttons on the remote control to set the current time--two digits for the hour and two for the minutes. Then press 1 or 2 for AM or PM, respectively.

For example, if it is now 2:15 PM, press 0, 2, 1, and 5 for hours and minutes, and press 2 for PM.

Continue pressing buttons to set the date. For example, if today is July 8, 1996, press 0, 7, 0, 8, 9, and 6 to get 07/ 08/ 96.

When you're done, press GUIDE twice to return to regular viewing.

Tips:

￿The white dash "--" appears for the item to be changed on the screen as you proceed.

￿The clock uses the 12-hour system. You set it for AM or PM.

￿An illogical time (like 13 for the hour or 20 for the month) will not be accepted.

￿If you press the wrong digit, exit the screen by pressing GUIDE and recall the screen to enter the correct setup.

￿The day of the week is set automatically.

More About Channel Selections

Your VCR is capable of receiving 68 broadcast TV channels (VHF 2-13, UHF 14- 69) and 125 cable channels (CATV 1-125).

1.Press GUIDE, then press 4 to bring up the CHANNEL PRESET screen.

2.Press 1 to select the type of receiving setup you have.

Each time 1 is pressed, the option for "1 CHANNEL" switches from <CATV1> to <ANT>, <CATV2> and back to <CATV1>.

<CATV1>:

Ordinary cable

<ANT>:

Internal or external antenna

22