7Press the number buttons to fill in the number of the month, then the day then the year.

•For dates with only one number (1-9) press the (0) button first, then the date.

For example, if today is July 8 1997, press (0)(7)(0)(8)(9)(7). The correct day of the week will appear by itself.

8Press the GUIDE button.

The VCR clock is now set, and should show the correct time of day on the VCR's display.

Notes:

•The clock uses the 12-hour system. You set it for AM or PM.

•An illogical time (like 13 for the hour or 20 for the month) will not be accepted.

•If you press the wrong digit, exit the screen by pressing GUIDE and recall the screen to enter the correct setup.

PRE-TUNING THE VCR TUNER

Note: An antenna or cable must be connected to the VCR before you begin this operation.

Presetting the received channels without using a cable box (Hookups [A], [B], [C] or [D])

1 Press the POWER button to turn on the VCR.

23