On-screen Display Illustration

Note: Immediately after the tape is inserted, "-:--" will appear. 2 minutes after playback or recording is started,

the tape remaining time is displayed.

Press the CLEAR button repeatedly to switch the type of tape is used. The correct remaining time will appear. AUTO: T-120 or shorter tape

T-160: T-140 or T-160 tape

T-180: T-180 tape

T-210: T-210 tape

Notes:

•The tape remaining time is not displayed correctly for a tape without any recordings or tapes other than T- 30/60/90/120/140/160/180/210.

•The remaining time may not be displayed correctly during fast forwarding or rewinding.

INDEXING WITH THE TIME COUNTER

•To find specific sections on a tape

Indexing with the Time Counter

You can set the time counter to memorize a certain point in the video programming, and you can return to that point automatically.

1Press the DISP button two or three times. The counter will appear in the VCR's display.

Remote Control Illustration.

2 Begin recording or playing back a tape.

3At the point that you want to go back to, press the CLEAR button. This resets the counter to 0:00:00.

4 Press the STOP button when you are done recording or playing back the tape.

40