Note: If a cassette has not been inserted or a cassette without safety tab has been inserted, the delayed recording indictor will flash to warn you. The cassette without safety tab will be ejected automatically. Be sure to insert a cassette with safety tab intact.
When you have set up all the timed recordings you want:
•Don't forget to load a videocassette (with the safety tab still attached) to record on.
•If you have installed a cable box (see page 26), set it up before starting recording.
If you are using a cable box the VCR can control; Turn on the cable box
If you are using a cable box the VCR cannot control:
Turn on the cable box and select the channel you want to record on the cable box (08 in this case).
Note: You can correct any item entered as you go by pressing the CLEAR button repeatedly until the digit to be corrected changes to white dash
To stop recording while in the timed recording mode: 1 Press POWER button.
2 Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.
Remote Control Illustration.
Important: Your timed recording settings take effect when you turn off the power on the VCR.
USING THE VCR PLUS+ SYSTEM FOR RECORDING
•About the VCR Plus+ system
This handy feature makes timed recording a snap. You don't need to enter the specific channel, date, time or duration of a program. All you enter is its PlusCode programming number - a number of up to eight digits. This special code is easy to find in your favorite TV program guide or daily newspaper. Here's a sample page from TV Guide showing PlusCode numbers next to each program.
50